Overview
Commercial plywood for furniture, interiors and packing
Choose commercial plywood by its face veneer, inner core and intended finish. Covered cabinet sides, clear-finished panels and packing cases each need a different combination.
CUZI supplies commercial plywood for furniture, interiors and general fabrication. Choose Bintangor, birch, Okoume or pine faces, with 3–30 mm panels, poplar, birch or eucalyptus cores, BB/CC or C/D face/back grades and E0/E1 options. Select the combination around the component you make.
Guides for your construction, finish and cutting layout
- Plywood density and weight connects the veneer schedule, sheet mass and packed weights.
- Birch faced vs all-birch compares the face, inner layers and fitting trial.
- Melamine faced plywood brings decor, reverse and edging into one finished panel.
- Plywood face and core selection routes connects the visible wood to the specification.
- Eucalyptus and combi core options identifies the inner veneer mix and lay-up.
- Packing plywood options connects full sheets or parts with the case drawing.
- MDF, particleboard and plywood compares the same furniture detail across materials.
- Sheet-size and thickness guide connects formats, units and the item schedule.
Applications
Furniture, decorative components and packing cases
Choose the grade around the component.
Scroll horizontally to compare all columns.
| Component / buying route | Face / back selection | Same-part trial |
|---|---|---|
| Covered cabinet sides and backs | Compare C/D and BB/CC under the intended laminate or veneer. Identify every covered surface and the exposed edge. | Surface preparation, bonded finish, machined groove, thickness fit and actual edging. Request a covered-part sample |
| Visible furniture and shopfitting | Start with a BB/CC sample; mark both the face and any reverse surface that remains visible. Keep repairs and colour range with the finish reference. | Coating, repairs under the finish, cut edge, adjoining grain and actual fitting. Request a visible-face sample |
| Kitchen cabinets and wardrobes | Separate visible doors/ends, covered carcass panels and concealed backs. Quote BB/CC or C/D by component and viewing side. | Service conditions, bond/emission requirements, coated edges, actual hardware, shelf supports and fitting trial. Request a cabinet trial sample |
| Distributor stock lines | List face species and grade pair for each item. Retain the agreed face/back range with the stock code. | Core schedule, nominal/finished thickness, sheet format, bundle identity and a repeatable reference sample. Request stock-line samples |
| Packing case components | Select BB/CC or C/D around visible faces, any lining/coating and the actual fixing areas. | Case drawing, contents, supports, joints, fasteners and agreed handling trial. Request a packing panel sample |
Use 3–30 mm and the selected poplar, birch or eucalyptus construction as the supply starting point. The part drawing sets the requested thickness, fit and relevant performance; name the face/back grading basis, bond and E0/E1 method with the destination.
For structural sheathing or a load-rated building panel, follow the structural plywood route with the project specification. Keep detailed furniture fitting and finishing checks in the hardware trial guide and component-cost comparison guide.
Furniture & cabinets
Match the face and cut core to cabinet sides, shelves and backs. Include the edging, hardware and machining your production line will use.
Interiors & shopfitting
Coordinate panels around visible surfaces, adjoining finishes and installation details. Identify the exposed faces and edges on the project drawing.
Distribution & fabrication
Build a stock mix around your regular dimensions, constructions and customer demand. Keep item codes clear for receiving, storage and repeat orders.
Compare a Bintangor face or pine face when a named veneer is part of the requirement. For selected natural veneers and matching layouts, explore decorative plywood.
Packing plywood: full sheets and cut case parts
PACKING PLYWOOD · SHEETS AND CASE COMPONENTS
Build the panel order around your packing case.
CUZI supplies packing plywood for case and crate components. Start with the contents, case drawing and handling plan, then choose the panel and quantities your packaging workshop will use. Bring sides, lids, dividers and base-panel requirements into separate order lines.
Choose thickness and fixings through the case drawing
Provide the contents and mass, case geometry, frame/support arrangement, fixing schedule and intended lifting, stacking and transport conditions. The chosen panel works within that complete case design. Trial the cut edge, joints and actual fasteners; include the packaging designer’s load or handling checks when they determine the selection.
Compare panels using the same case drawing and cutting layout. Record usable parts, assembly work and weight, then review the case’s loading requirements with the design team.
Export cases and ISPM 15: identify every wood component
ISPM 15 exempts packaging made wholly from qualifying processed wood material such as plywood produced using glue, heat or pressure. Identify any solid-wood frame, pallet, blocking or dunnage separately and confirm the complete package’s destination requirements with your packaging/export team.
Orders start at one container and can mix packing-panel items with other plywood or MDF. List quantities by construction and size. Regular board production guidance is 7–15 days; confirm any part-processing schedule with the quote and name the FOB shipment port or CIF destination port.
Specifications
Supply specifications
Regular sizes mm · width × length
On request
Other sheet sizes and cut-to-size panels on request.
| Nominal thickness | 3–30 mmView measured panel data → |
|---|---|
| Core / substrate | Poplar, birch or eucalyptus |
| Face / back grade | BB/CC; C/D |
| Emission grade | E1; E0Formaldehyde emission grade. Compare grades, test methods and report values → |
Measured product data
ECQA · Plywood · 2500 × 1250 mm · 21, 24 and 30 mm
- Inspection conclusion
- PASSECQA · Reported conclusion
- Workmanship sampling
- 80 panels23 / 20 / 37 by thickness
- Moisture readings
- 6–10 %Report criterion: 5–14%
Appearance · dimensions · moisture · quantity · packaging
View recorded thickness, diagonal & weight measurements
| Nominal thickness | Thickness readings | Diagonal difference | Panel weight |
|---|---|---|---|
| 21 mm | 21.09 / 21.05 mm | 1 / 1 mm | 46.5 / 46.6 kg |
| 24 mm | 24.10 mm | 1 mm | 50.0 kg |
| 30 mm | 30.21 / 30.10 mm | 1.5 / 1 mm | 63.5 / 63.6 kg |
Finished thickness and squareness for your selected panel are specified in the quotation. Include the drawing and fit required by your component.
Details for your application
Panel construction and finishing
| Face veneer | Bintangor, birch, Okoume or pine; specify the selected face and reverse veneer. |
|---|---|
| Core & lay-up | Core species and ply construction quoted for the selected panel, with cut-edge and joint requirements included. |
| Face / back grade | Specify the required grades, visible surfaces and acceptable repairs or colour variation for each item. |
| Surface & processing | Sanded panels; requested coating, veneering, lamination, routing or edging detailed in the quotation. |
| Bond & emissions | Include the exposure, required bond performance, emission class, test method and destination for the proposed construction. |
| Order & mix | One container minimum; mixed loads available. List sizes, constructions and quantities separately. |
Put the complete panel beside the price.
List each construction by item code. The quote can then identify the material, dimensions and finishing scope for every line in a mixed order.
| Face & back | Veneer species, face/back grades, visible sides and agreed limits for repairs or colour variation. |
|---|---|
| Core & lay-up | Core species, ply construction and the cut-edge or joint requirements of the finished component. |
| Dimensions | Sheet or cut size, nominal thickness, finished thickness tolerance and grain direction. |
| Bond & emissions | Intended exposure, required bond performance, emission class, test method and destination requirements. |
| Workshop process | Sanding, painting, veneering, laminating, routing, edge banding and assembly requirements. |
| Order scope | Sheets or parts by item, packing, sample reference, FOB shipment port or CIF destination port. |
For a price comparison, use the same construction, quantities and delivery basis. Ask for any alternative face, core or finishing scope as a separate line so you can see what changes the cost.
Buying parts rather than full sheets? Use the cut-to-size panel inquiry to define part dimensions, quantities, grain direction and requested processing alongside the plywood construction.
Configuration
Compare face veneers, core construction and appearance grades
Choose the surface and construction around what your customer will see and what your workshop will cut. Use a representative component to compare the complete result.
Need to compare the core as well as the face? Start with poplar core plywood, then include the face selection and finished-part requirements in the inquiry.
Four face veneers. Your finish sets the reference.
Start with the wood your customer will see. Compare the chosen grain and colour under the coating or facing you intend to use, then name the reverse veneer and core separately.
Bintangor face
Compare the face veneer and cut edge, then use a physical face/back sample to agree colour range, repairs and the grading basis for your order. Name the reverse veneer and inner-layer species in the same item description.
Buy the face and back as a pair.
BB/CC and C/D are available face/back options. For a furniture-grade or cabinet-grade plywood inquiry, identify the actual viewing surfaces, finish and required fit beside that pair.
Specify the acceptable features on each face: repairs, open defects, veneer joints and colour variation. Keep the supplier’s grading description and selected physical reference with the item code.
Eucalyptus and combi cores: define the inner veneer schedule
EUCALYPTUS CORE & COMBI PLYWOOD · DEFINE THE INNER VENEERS
Choose the core around the part you will make.
CUZI supplies eucalyptus-core and combi-core plywood. Bring the visible face, nominal thickness and workshop detail into the same brief. The selected veneer species, layer arrangement, bond and finished requirements identify the construction behind your quotation.
Commercial plywood is available in 3–30 mm nominal thicknesses. Match the selected core to the quoted veneer lay-up and tolerance; ply count, individual veneer thicknesses and measured mass or density are recorded for the proposed construction.
Compare the proposed cores on the same component
- Keep face/back, nominal thickness, finished dimensions, bond and processing scope on the same basis.
- Record the core species and layer sequence. Inspect representative cut edges, slots and fitting positions against the agreed sample criteria.
- Run the cutting, joint, hardware and finishing process your production uses. Include a measured mass or an agreed component test if it forms part of the selection.
- Retain the chosen core schedule, physical sample, observations and drawing revision with the order item.
For structural, outdoor or marine use, include the required grade, exposure and installation or loading details. We’ll discuss the appropriate panel construction and product documents with you.
Cabinet cutting calculation: 500 sets with fixed grain direction
Compare sheet quantities for a 500-set cabinet schedule with part orientation, trim and kerf stated explicitly. Apply the actual cutting list and production allowance when ordering.
If separate face selections suit the components, keep their item codes visible through storage and cutting. If one shared panel fits the complete set, compare the purchasing and production benefit with the quoted total cost.
Turn 500 cabinet sets into three purchasing lines.
For this planning calculation, each cabinet uses two 600 × 400 mm sides, one 800 × 600 mm back and one 580 × 350 mm shelf. The drawing calls for 18 mm sides and shelves and a 6 mm back. Both thicknesses sit within the confirmed 3–30 mm supply range; the finished cabinet design determines the required supports, joints and fit.
Scroll horizontally to compare all columns.
| Order line | Parts to produce | 1220 × 2440 mm cutting count |
|---|---|---|
| Sides · 18 mm | 2 per cabinet × 500 = 1,000 sides, each 600 × 400 mm. | 3 across × 4 along = 12 per sheet. 84 sheets have geometric capacity for 1,008 sides. |
| Backs · 6 mm | 1 per cabinet × 500 = 500 backs, each 800 × 600 mm. | 2 across × 3 along = 6 per sheet. 84 sheets have geometric capacity for 504 backs. |
| Shelves · 18 mm | 1 per cabinet × 500 = 500 shelves, each 580 × 350 mm. | 3 across × 4 along = 12 per sheet. 42 sheets have geometric capacity for 504 shelves. |
The cutting counts allow a 5 mm trim on every sheet edge and a 3 mm kerf between parts. The longer part dimension follows the sheet length and face grain; each component is cut in its own pattern. This totals 126 sheets at 18 mm and 84 sheets at 6 mm, covering 625.128 m² of purchased panels. Surface defects, production rejects and a stock reserve are additional to this geometric count.
If the side and shelf constructions are identical, a combined nesting plan may use the 18 mm sheets differently. Recalculate the real part layout before consolidating quantities. The mixed-order schedule keeps the component codes attached to the final full-sheet or cut-part order.
Consolidate only the details your production can share.
- Same purchasing item: face/back species and grade, inner-layer schedule, thickness/tolerance, bond/emission requirements and supplied surface treatment are the same.
- Separate component references: the part dimensions, grain arrows, edge treatment, hardware positions and drawing revision remain identifiable after cutting.
- Separate offers: keep a different face, reverse, core, thickness or finish as its own price line. Trial that alternative with the affected component before replacing the shared item.
A shared panel can simplify stock and machine setup. Separately selected faces or thinner concealed backs can serve a different cost target. Compare both schedules through the completed cabinet: purchasing, usable cuts, finishing, assembly, rework, storage and the quantities left over.
Documents
Plywood documents and an all-birch shipment inspection
The ECQA record below covers a 2500 × 1250 mm all-birch shipment in 21, 24 and 30 mm. It shows measured dimensions, workmanship and packing checks. For other commercial plywood constructions, request the selected panel’s own technical data and inspection requirements.
- Inspection conclusion
- PASSECQA · Reported conclusion
- Workmanship sampling
- 80 panels23 / 20 / 37 by thickness
- Moisture readings
- 6–10 %Report criterion: 5–14%
View panel thickness, diagonal checks & weights
Scroll horizontally to compare all columns.
| Nominal thickness | Thickness readings | Diagonal difference | Panel weight |
|---|---|---|---|
| 21 mm | 21.09 / 21.05 mm | 1 / 1 mm | 46.5 / 46.6 kg |
| 24 mm | 24.10 mm | 1 mm | 50.0 kg |
| 30 mm | 30.21 / 30.10 mm | 1.5 / 1 mm | 63.5 / 63.6 kg |
The recorded dimensional criterion is ±1.5 mm; the diagonal-difference criterion is 2 mm. Put the required finished thickness, squareness and fit beside each furniture or stock item in your own order. Use sheet weights for panel handling and packed gross weights for the warehouse and shipping plan.
View workmanship, sampling & moisture findings
| Product description | 100% birch plywood; WBP; phenolic E1 glue |
|---|---|
| Inspection type | FRI |
| Appearance basis | CP grade |
| Workmanship sampling | 80 panels across the three thicknesses |
| AQL plan | Critical: not allowed · Major: 2.5 · Minor: 4.0 |
| Defects recorded | 0 critical · 0 major · 2 minor |
| Minor findings | 24 mm: surface dirt · 30 mm: remaining material not removed |
| Moisture check | 2 panels per thickness · 6–10% readings · 5–14% report criterion · Pass |
| Report conclusion | PASS |
CP is the appearance basis in this inspection. For your commercial order, choose BB/CC or C/D with the face species, permitted repairs and finish reference. Agree sampling and check criteria by item, and request the relevant bond and emission documents for that construction and destination.
View packing measurements & quantity records
Scroll horizontally to compare all columns.
| Panel item | Packing dimensions | Gross packing weight |
|---|---|---|
| 21 mm | 251 × 127 × 92 cm | 1773 kg |
| 24 mm | 251 × 127 × 97 cm | 1706 kg |
| 30 mm | 251 × 127 × 91 cm | 1711 kg |
Scroll horizontally to compare all columns.
| Panel item | Order quantity | Available quantity | Unfinished quantity | Workmanship sampling |
|---|---|---|---|---|
| 21 mm | 1596 | 1596 | 0 | 23 |
| 24 mm | 1376 | 1375 | 1 | 20 |
| 30 mm | 2548 | 2547 | 1 | 37 |
The report records protected, strapped packs and notes that pallet labels were to be added at shipping. For a mixed order, label each face, core, thickness and format against its item code. Confirm completed sheet counts, sheets per pack and measured gross weights before dispatch, then use that final packing list for the loading and receiving plan.
Product test reports & records
Plywood Pre-Shipment Inspection Report
Plywood · 2500 × 1250 mm · 21, 24 and 30 mm
Plywood inspection records covering appearance, dimensions, moisture content, quantities and packaging, with on-site photographs.
Appearance · dimensions · moisture · quantity · packaging
Inspection date:
What this report covers
ECQA records a final random inspection of all-birch plywood at 2500 × 1250 mm in 21, 24 and 30 mm. The report names Linyi Cuzi plywood Co., Limited as the factory and gives a PASS conclusion for this inspection. Its observations describe the inspected panels and packs before shipment.
Turn the checks into your purchasing schedule.
Scroll horizontally to compare all columns.
| Buying decision | What the ECQA file records | What to include in your order |
|---|---|---|
| Panel identity & appearance | 100% birch construction, WBP, phenolic E1 glue and CP appearance basis. | Face/back species, poplar, birch or eucalyptus core and complete lay-up; BB/CC or C/D, selected finish and physical face/back reference. Keep each alternative on its own price line. |
| Workshop fit & handling | Thickness and diagonal measurements, sheet weights and moisture readings by the inspected gauges. | Nominal and finished thickness limits, component drawing and joint or hardware trial. Request measured sheet mass when a handling target affects the selection. |
| Warehouse & freight plan | Packing dimensions, gross packing weights and photographs of protected, strapped packs. | Sheets per pack, item labels, protection, measured pack dimensions/gross weights and unloading limits. Use pack records with the actual item mix when planning the container. |
| Dispatch & repeat supply | Order, available and unfinished quantities by gauge, with workmanship sampling and findings. | Completed quantities and final packing list by item. Keep the inspection file, chosen sample and specification revision with the stock code for receipt and repeats. |
Buying for more than one workshop or stock line? Use the mixed-panel order schedule to connect sheet quantities, pack labels and destination for every construction. Carry those references into the incoming-panel check.
The selected trial above requests a birch face, poplar core and BB/CC at 18 mm in 1220 × 2440 mm. Edit the face, core, size and grade in your inquiry to match your stock or component line. For the all-birch construction in the inspection record, explore the birch plywood inspection and sample options.
Bring the selected construction into your purchase file.
See how plywood manufacturing connects with your purchase specification. Keep the veneer schedule, bond, finished dimensions and item-linked quality records with the proposed commercial panel.
For US and EU orders, our emission-document guide helps identify the product category, required assessment and shipment records with the proposed plywood.
Request the documents your purchasing team needs for the selected construction and destination. Include them with the item schedule so the quote, sample and order use the same panel description.
For a building application, use the structural plywood route and include the project specification. Add any required marking, declared properties and installation documents to that inquiry.
Product data & reports to request
Request a technical data sheet covering:Face/back grade, core species and lay-up, bond, thickness tolerance and the agreed surface finish.Include these specification details:- Face/back and core schedule, nominal thickness, dimensions and agreed tolerances.
- Product data and relevant bond or emission reports for the proposed panel.
- Required test methods, product or project requirements and any certification needed in the order documents.
Company documents to view
FSC chain of custody Wood panels · purchase & salesISO 9001 & ISO 14001 Management systems · stated sales activitiesEN 13986 plywood document Non-structural scope · listed modelsView our company certificates alongside the technical data for your selected panel.Furniture & interior panels: what to match
- Technical data
- Face/back grade, core species and lay-up, bond, thickness tolerance and the agreed surface finish.
- Emissions
- For covered hardwood plywood entering the US, request TSCA Title VI certification or applicable exemption documentation, with producer and product identification. For other markets, specify the required emission class and test method. For European furniture and wood-based articles, include the applicable REACH Entry 77 / Appendix 14 emission requirements.
- Sample match
- Connect the data sheet and reports to the proposed construction, thickness and sample reference.
US & EU document checklistProduct + destination
Your panel specification. Commercial plywood: selected face/back grade, named core and lay-up, bond, gauge and producer.
Thickness: 3–30 mm.
US
Applicable hardwood-plywood category for the proposed construction and intended use.
Request US documentsEU
Selected face/core construction, finish and intended wood-based article.
Request EU documentsKeep the named face, core, adhesive and quoted grade with the product reference and supporting reports.
BEFORE YOU ORDER
Ordering information
- Minimum order
- 1 container
- Production time
- 7–15 days
- Samples
- Free samples
- Delivery terms
- FOB Qingdao / Lianyungang
USD 250–500 / m³ FOB Qingdao / Lianyungang
CUZI · Available to order · Raw materials in stock
Made to order · Production: 7–15 days · Warranty: 180 days
Container shipping by sea. Custom specifications and sizes available; ocean freight quoted separately.
Sample freight & order notes
- Minimum order: Mixed loads available.
- Production time: Made to your order; sea transit is additional.
- Samples: Buyer pays freight; full credit on a formal order.
- Delivery terms: Container shipping by sea.
Quality & trial
Sample checks for cutting, finishing and fittings
Request the face veneer, core and thickness for your component. Cut a representative part, apply the intended finish and fit the actual hardware. Compare exposed core, visible repairs and finished fit across the proposed constructions.
Compare the cost of usable components
Record sheet cost, accepted parts from the cutting layout, preparation time and rework for each proposed construction. Keep quantities, freight and delivery terms on the same basis when comparing the order. The useful result is the cost of the components you can put into production.
Commercial plywood sample and receiving worksheet
Use the worksheet below to record the selected panel, agreed checks and results for your component or site trial.
| Check | Record during evaluation |
|---|---|
| Panel identity | Item code, sample/bundle reference, face/back grades, core, bond, dimensions and specification revision. |
| Core species and layer schedule | Eucalyptus core or named combi mix; face/back species, core-layer sequence, veneer thicknesses and sample identity. Record any requested throughout-species scope separately. |
| Core comparison on the part | Same face, dimensions, bond and process; measured mass/conditions when requested, cut-edge observations, joint or hardware trial and relevant proposed-panel data. |
| Thickness & fit | Measured positions and values, agreed tolerance, machining setup and mating-joint or hardware fit. |
| Cut core & edges | Photographs with scale and part location, visible-edge result and observations at slots or fittings. |
| Surface & finish | Appearance range, repairs, preparation time, coating/lamination process and finished-component result. |
| Usable components | Cutting layout, accepted parts, reasons for rejects and any rework, with the drawing revision. |
| Quantity & pack condition | Sheets by item, bundle counts, packing-list differences, transit damage and photographs at receipt. |
| Case and packing component | Contents/mass, case drawing, part list, grain direction, supports, joints, actual fasteners and agreed assembly/handling trial. |
Record a difference before allocating the sheets
Identify the affected item and bundles, retain photographs and compare the observations with the order criteria and selected sample. Keep transport damage, dimensions, face appearance and cut-core observations distinct so the follow-up can address the relevant requirement.
FAQ
Commercial plywood buying questions.
Which commercial plywood can I order?
CUZI supplies 3–30 mm panels with Bintangor, birch, Okoume or pine faces and poplar, birch or eucalyptus cores. BB/CC and C/D face/back grades and E0/E1 options are available for furniture, interiors and fabrication.
Which sizes are available, including cut parts?
Regular sheets are 1220 × 2440, 1250 × 2500 and 1525 × 3050 mm. Larger formats and cut-to-size parts are available on request. Send finished dimensions, grain direction, quantities and any holes, slots or edge work.
How do I choose face grades for cabinets and covered panels?
Identify the faces your customer will see and the paint, veneer or laminate you will apply. Compare BB/CC or C/D with the proposed surface preparation, repairs and cut edge. A finished component sample helps select the grade for your cabinet.
Can I specify eucalyptus or combi core?
Yes. Specify the core separately from the face and back. For combi plywood, the quotation identifies the veneer mix, layer arrangement and ply count. For an all-eucalyptus panel, include eucalyptus faces as well as the inner layers; request density or performance data when these matter to the part.
Are all commercial plywood panels moisture resistant?
No. Commercial plywood is not a moisture-resistance grade; the selected bond and complete construction determine suitability for the exposure. The required bond depends on where the panel will be used. Tell us whether the application is dry, humid or exposed, and specify the surface and edge protection. For load-bearing sheathing, use the structural plywood range with the project’s required properties and documents.
Can you supply plywood for packing cases?
Yes, as full sheets or cut parts for your case drawing. Include the contents, handling method, face/core, thickness and bond requirements. Check solid-wood framing or pallets separately from plywood when planning export packaging; the packing-case section covers the material choices.
What inspection and product documents can I review?
The ECQA inspection record records workmanship, dimensions, moisture and packing checks on a 21, 24 and 30 mm all-birch order. For your shipment, give each construction an item code and agree checks against the chosen sample. Request bond, emission and destination documents for those items.
What affects the quoted price?
The selected face and core, bond, grade, quantity and processing determine the final quotation. The range is USD per m³, FOB Qingdao / Lianyungang. Your quotation identifies face/back grades, core, bond, dimensions, quantities and processing. Comparing the same construction and supplied work makes prices easier to compare; include a destination port for CIF.
Are samples free, and can I mix products?
Yes. Samples are free, with courier freight credited in full against a formal order. The minimum order is one container; mixed loads can combine faces, cores, grades and sizes with quantities listed separately.
How long does production take, and what are the payment terms?
Production takes 7–15 days to the order, with shipping time additional. We deliver by sea container and accept T/T or L/C, with payment stages agreed per order. The warranty is 180 days.
Further reading: Plywood Manufacturing: From Veneer Lay-up to Your Purchase Specification or Plywood Density and Weight: Estimate Your Item by Construction. Compare your shortlisted panels.
Request a quote
Get a commercial plywood quotation
Send the application, dimensions, quantity and destination to begin. Use this outline when you want to include the construction, sample and packing details together.
Open the commercial plywood inquiry outline
I would like a quotation for Commercial Plywood. Application / destination: Thickness / sheet or finished part size: Face and back species / grade: Core / bond / emission requirement: Finish / cutting or machining needed: Quantity / mixed-load items / spares: Samples or product documents needed: Packing / FOB or CIF port / required date:
For a named face, start with Bintangor plywood or pine plywood and attach the component requirements. For mixed distributor schedules, include your item codes and replenishment quantities from wholesale panel planning.
Item mix and repeat orders
List face species, face/back grade, core, thickness, size and quantity separately. For furniture production, use the component cut list; for stock orders, identify each saleable panel item and its repeat-order reference.
Make the next order easier to place
Reuse the item codes, chosen sample references, dimensions and packing arrangement. Highlight changes in quantity, core, face grade, finish or destination against the previous order. For distributor schedules spanning different panel materials, see wholesale panel planning.
Packing and receiving
Separate constructions and grades by bundle label. Specify face protection, sheets per pack and handling limits; match the packing list to the item codes used by your warehouse or workshop.
Include your destination and receiving requirements when requesting the shipment plan.
EXPLORE THE CATEGORY
Compare panels in this product family
Pine Plywood
Pine softwood plywood, furniture, interior lining and packaging; all-pine core requirements
Spruce Plywood
Spruce plywood, spruce faced plywood, spruce veneer plywood, softwood plywood, spruce throughout requirements; interior linings, joinery, packing components and specified floors roofs walls
| Product route | Start here when | What to compare |
|---|---|---|
| Commercial PlywoodMixed furniture and fabrication | Several component types share one order | Separate visible faces from concealed parts before choosing a common construction. |
| Birch Plywood ManufacturerCNC parts and layered edges | Cut edges or tight machining determine acceptance | Compare a machined joint and finished edge, with face and core construction recorded. |
| Bintangor PlywoodNamed faces for general interiors | The face will be visible or covered in different items | Define face selection separately from the core and the finishing process. |
| Okoume PlywoodWeight-sensitive assemblies | Face species and full lay-up need to be distinguished | Ask whether the offer is Okoume faced or all-Okoume, then compare the actual assembly. |
| Poplar Core PlywoodPortable furniture and cabinetry | Core weight and hardware performance both matter | Compare a complete joint and component mass for the same drawing. |
| Pine PlywoodPacking, furniture and specified panels | Knot appearance, fixing or a design requirement leads | Name the intended use and grade; separate visible furniture from general packing stock. |